Double Glazed Window Repair
It's worth looking over the warranty included with most double-glazed windows. It generally covers any issues with the hardware of the window including hinges and locking mechanisms in the first 10 years.
Mist in between glass windows can be caused by a breach in the seal and needs to be repaired quickly to prevent mould or damp developing in your property.
Condensation Between the Windows
If condensation develops between the windows in your home, it's an indication that the seal holding the gas that is used to insulate between the panes has failed. This is a serious issue that needs to be addressed immediately, especially during winter when the humidity levels are at their highest. It could cause damage to the sills, sealant, and even mildew or mould.
Double-glazed windows should not have condensation between the panes. This is often caused by extreme humidity or a cold snap. This issue is usually resolved without having to replace the entire window. A professional can drill tiny holes in the glass and then spray the inside of the window with a specific cleaning solution. The water is then drained from the window and an anti-fogger is fitted to stop the build-up of moisture in the future.
Condensation may also occur between the windows due to air leakage, or other factors outside the window. In this instance, it may take longer for the moisture inside the window to build up as the air must be warm enough to evaporate the water molecules. In these cases it is recommended to replace the double glazed windows rather than repair the existing sealed units.
A double-glazed glass window is comprised of two or more pieces of tempered insulated glass that are joined by a metal framework. The gap between the two windows is filled with an insulating gas such as argon or Krypton and then sealed. The seal prevents the gas that is insulating from escape and also prevents air and moisture from entering through the gap.
As the windows age, the seals get worse and let moisture in the gap between the glass panes. It is crucial to recognize when seals are beginning to leak because it indicates that the double glazing is no longer functioning as well as it once was. This can lead to an increase in energy efficiency, increased heating costs, damage to the property and the risk of condensation forming between windows.
Mist
It is perfectly normal to observe condensation on your windows. This means that your double glazing system is functioning properly and is keeping warm in your home. The condensation occurs because the outside air is more warm than the glass and reaches its dew point before the window does. This is one of the great advantages of having high quality double glazing.
If you see condensation on the inside of the window, it could indicate a ventilation issue within your home. The moisture that is accumulating can't go anywhere else and ends up on the carpets, windows furniture, and other areas of your home. The process of having this examined by an expert and ensuring that there plenty of fresh air flowing through the home will help prevent it in the future.
Another reason why mist appears on double-glazed windows is because the seal between two panes of glass is broken. This could be due wear and tear or chemical cleaning solutions that are being used. If this occurs it is best to repair the windows in the shortest time possible.
Professionally repairing your windows will ensure that they are fog-free free of condensation, and free of misting. This is also much cheaper than replacing your windows and you'll save money on your energy bills.
A FENSA certified window installer can offer a price for repair or replacement of your double glazed windows. Upgrade your old windows to energy efficient ones that are A-rated in the event that they are extremely old.
It is a good idea to keep copies of any warranties or agreements with your window fitting company. This will be very useful if any problems with the windows occur in the future, and you then contact your window fitters to resolve the issue. This is a much better option than ignore the issues that will only get worse and may lead to other problems in the home.
The difficulty of opening or closing the door
Double-glazed windows become difficult to open and close, it isn't just annoying and can result in higher energy bills because of heat loss and draughts. It can also pose security risks, particularly if the locks don't work correctly. It is essential to fix any issues with double glazed windows and doors as soon as you spot them.
If you have tried opening your window using the simplest methods, like using a screwdriver or tapping on the frame with a solid object, the issue may be more serious. It could be that the window is sagging within its frame and requires to be re-set or it could be that there is an opening between the glass panes and frames. In either of these scenarios, you must seek out an experienced double glazing repair expert to make sure that the correct repairs are made and to avoid any future issues.
It isn't common for UPVC window handles and lock mechanisms to get stuck or hard to operate, especially when they are old and worn. It is usually caused by an accumulation of dirt or grease inside the handle. This can be easily resolved by cleaning it with a uPVC cleanser. If this doesn't work, you could try gently tapping the uPVC frame with a hard object, such as a screwdriver, being careful not to harm the handle or the mechanism for window handles.
If this doesn't solve the problem then the window may have to be replaced as it is likely that the hinges are no longer in the correct position or the locking mechanisms are damaged. In this instance, you should contact an UPVC window specialist.
David The Window Wizard is a specialist in double-glazed window and door repairs, including fixing a double-glazed window that has jammed or been locked shut. He has vast experience changing old window mechanisms to modern ones. This often can save you the expense of replacing the whole window. Call or email us today for more details or a no-cost quote.
Warping
Double-glazed windows are usually the best option for saving energy at home. They consist of two separate panes, with a spacer air or dense gas between the panes, which creates a seal to keep cold air out and warm air in. However, over time, these windows can be damaged or destroyed and require repair. Fortunately, the majority of repairs are simple and can be accomplished without the expense of replacing the entire window.
Warping is a typical issue with double-glazed windows. The windows begin to bend or twist or bow. This can affect the structural integrity and insulation capabilities of the window. Double-glazed windows must be properly installed and maintained to avoid this issue.
If your double-glazed windows are beginning to warp, it is important to contact a specialist immediately to stop the problem from getting worse. They will be able inspect your windows to identify the reason. They will make use of special tools to fix your problem and ensure that you windows are fully sealed again.
A common cause of this issue is water vapour in the windows which can build up over time. This can be caused various factors including humidity, weather conditions and temperature variations. To fix upvc sash windows this problem, the specialist will drill out a small hole to release moisture. They will then use an agent to clean the glass and apply sealant to help keep it dry in the future.
If your windows can't be closed or opened, it could be due to a broken mechanism or hinges. It is advisable to grease these parts of the window before calling a professional as this can often solve the issue and lessen the necessity for replacements. If your windows are old or do not provide the insulation you'd like to have it is usually better to replace them.